Micronized aluminum alloy machining

Paint oxide ceramic powder should use advanced powder processing equipment and advanced aluminum alloy processing technology, and the particle size of the powder should be less than 1 micron. The aluminum alloy powder can only be used in similar cermets, and organic liquid must be added as a grinding medium for wet film. Make the micro-powder evenly distributed when mixing

Paint oxide ceramic powder should use advanced powder processing equipment and advanced aluminum alloy processing technology, and the particle size of the powder should be less than 1 micron. The metal powder can only be used in the same type of cermet, and organic liquid must be added as a grinding medium for wet film. When mixing, make the micro-powder material evenly distributed, and dry it in a low temperature and vacuum drying box after mixing to prevent metal oxidation.

The coating products are molded by pressing, grouting, extrusion or isostatic pressing, and then fired in a protective atmosphere. Products with simple shapes can also be formed by hot pressing.

The firing temperature range of aluminum alloy ceramic products is generally higher than the melting point of the metal and lower than the sintering temperature of the ceramic. The sintering mechanism has the following two situations: sintering without reaction between the solid phase and the liquid phase, such as Sintering of cermet based on oxide-metal; sintering in which a certain degree of reaction occurs between the solid phase and the liquid phase, such as the sintering of gold-aluminum alloy based on carbide-metal.